AGILE and SUPER TECHNOLOGICAL

Fifty years after its debut, Vespa Primavera is still the voice of young people, in harmony with the spirit of freedom, dynamism and attention to environmental issues. Uninterrupted success and a restyling that today makes it even more agile and super-technological.
The new 12-inch wheel rims with five-spoke design, the largest in Vespa history, provide stability and total safety on all road surfaces. The 150cc with its sleek new i-Get electronic injection 4-stroke and 3-valve single cylinder engine with catalytic converter and with Euro-4 multi-directive emissions compliant is brilliant partnership between power, technology and caring for the environment. The injection system has been optimized and improved in terms of efficiency; the ECU now has a barometric sensor that guarantees optimum combustion every time in any condition of use and at any altitude.
Fully automatic and self start,  a perfectly calibrated gearbox with new and more resistant friction materials for the dry centrifugal automatic clutch contributes to this result.
Vespa Primavera, the ABS braking system now comes standard, a further technical advancement intended to increase safety. The front wheel on Vespa Primavera has a speed detection system – a sensor and a tone wheel – which instantaneously measures its speed and deceleration compared to that of the scooter. The sensor dialogues with an electro hydraulic control unit which activates the ABS system if the wheel decelerates abruptly, preventing locking and the consequent loss of control over the vehicle, thereby guaranteeing stability, vehicle control and efficient braking even on low friction coefficient surfaces such as wet or dirty asphalt. 
It’s classy and technological, elegant and sophisticated; that’s something you don’t always get to say about a scooter. It’s a way of being and a state of mind, besides being a means of transport.

Technical Specifications

Engine: Single cylinder 4 strokes, with catalytic converter and electronic fuel injection (EFi), Single overhead camshaft – 3 valves (2 intake, 1 exhaust)
Transmission: Automatic Twist and Go (CVT with torque server)
Clutch: Automatic dry centrifugal clutch with vibration dampers
Capacity: 154.8cc
Bore x Stroke: 58mm x 58.6mm
Max Power: 12.9 HP (9.5kW) at 7,750 rpm)
Max Torque: 12.8 Nm at 6,500 rpm
Fuel Supply: Electronic Fuel Injection (EFi)
Cooling: Forced Air
Starter: Electric

Load Bearing Structure: Sheet metal body with welded reinforcements
Front Suspension: Single arm with coil spring and dual action monoshock absorber – axial stroke 78 mm
Rear Suspension: Coil spring with adjustable preload (4 settings), dual action hydraulic monoshock; 70mm axial stroke
Front Brake: Hydraulically operated 200 mm stainless steel disc; ABS
Rear Brake: Mechanically operated 140 mm drum
Front Tire: Die-cast aluminium alloy , Tubeless 110/70-12”
Rear Tire: Die-cast aluminium alloy , Tubeless 120/70-12″
Consumption: 40.3 km/l
Fuel Tank Capacity: 8 Liters
Vehicle Weight: 118 kg
USB Charging: YES
Storage Compartment: YES
Front Glovebox: YES